G-700

Wood Dust Processor

HEPA Filter

15m Wireless Remote Control

A Revolutionary Dust Processor

Because of the principal contradiction between dusty air flow and filtration, traditional dust collectors are struggling with filter clogging or bad air quality. Most of the dust collectors are very loud, bulky and difficult to maintain. This has been a long-standing pain for woodworkers.
To solve this problem, the Harvey team of engineers spent over 7 years of research and study, to develop an unprecedented Dust Collector, the GRYO AIR® G-700 Wood Dust Processor. The G-700 GYRO AIR® Wood Dust Processor incorporates a unique, patented technology to separate dust particles from the air and capture them before they enter the filters.The G-700 uses the new Axial Centrifugation Technology (called GYRO AIR® Technology), to spin the air/dust stream up to 4,000 RPM and generate a super strong centrifugal force (over 100 times gravity) to separate the dust from the air and collect it in two dust bins hidden internally in the unit. The G-700 collects 99.7% of the dust particles before the air reaches its HEPA filters. This not only means much less cleaning of the filters, but that the airflow and static pressure will remain much more constant during operation. In addition, the air emission cleanliness level from the filters can reach an unbeatable 0.05 mg/cubic meter (50% better than the European Standard of 0.1 mg/cubic meter). The entire extraction system is aerodynamically optimized with extraordinary running efficiency, so it can save up to 50% in energy costs.
The GYRO AIR® technology and its unique aerodynamic design allow the G-700 GRYO AIR® to run at an incredibly low noise level of 61 to 72 dB(A), depending on which speed you run the GYRO AIR® … yes, it is a variable-speed machine that allows you to adjust the airflow to suit your needs. The G-700 is powered and controlled by a SIEMENS industrial 2HP motor and SIEMENS V20 Variable Frequency Driver for 24/7 applications. In addition, the GYRO AIR® G-700 is equipped with a built-in Dust-Bin monitor and a Remote Control Key.
Its fully enclosed housing is short enough to fit under most benches, and it has heavy-duty casters to allow it to move as needed. The two dust bins are sealed when in use but are then easily accessed through a panel on the side of the unit, and they roll out for easy emptying (and you can use disposal bags to take out wood chips).

State of Art Engineering for Life Time Reliability

未标题-3
未标题-2

Features and Benefits

Features and Benefits

99.7% dust separation before filtration

Energy Savings

Up to 50% energy savings (only 1.5 kW)

Quiet

Super low noise 61-72 dB(A)

99.7% dust separation efficiency before filtration


Super low noise (61 -72 dB(A)


Compact size with built-in mobility kit


Powerful and consistent static pressure


Up to 50% energy savings (only 2 HP)


HEPA filters 0.3 micron


Extremely clean emission (0.05 mg/m³)

Extremely Clean Emission

Filter emission rating 0.05 mg/m³

Never Blocked

Powerful and consistent static pressure

SIEMENS industrial motor and VFD speed control


Intelligent dust-full monitor Remote control


Power coated steel frame


Stainless steel dust separation system


Convenient tool-less dust tank cleaning


1-2 Dust port adapter


RED-DOT industrial design award

Standard Equipment

Pressure Gauge

Buzzer for the Alert of Dust Bin Full

Control Panel with Variable Speed Control

Dust Port Adaptor

Pressure Gauge

Manual Filter Cleaning

Built–in Mobility Kit

2x Filters

Dust Bin Inside the Machine

Remote Control

Specifications

Electrical

Imperial

Metric

Power Requirement

220 V, Single Phase, 60 Hz

220 V,Single Phase,50 Hz

Breaker Size

20 A

20 A

Inverter Type

Siemens V20

Siemens V20

Motor

Imperial

Metric

Type

TEFC Induction

TEFC Induction

Power

2 HP

1.5 kW

Rated Amps

5.8 A

5.8 A

Speed

2280-4275 rpm Variable

2280-4275 rpm Variable

Product Dimensions

Imperial

Metric

Overall Dimension

56-1/4 x 23-1/2 x33-7/8 in.

1430 x 579 x 858 mm

Packing Size

59 x 28-1/2 x42-1/4 in.

1500 x 725 x 1072 mm

Product Weight

Imperial

Metric

Net Weight

445 lbs

195 kg

Gross Weight

510 lbs

222 kg

Performance

Imperial

Metric

Max. Air Flow

1110 CFM

1885 m³/h

Max.Static Pressure

18-1/2 inch water

4600 Pa

Max.Air Flow @4 inch hose

700 CFM

1190 m³/h

Static Pressure @ 4 inch hose

5-5/8 inch water

1400 Pa

Impeller Size

12 in.

300 mm

Main Inlet Size

6 in.

150 mm

Adapter Inlet Size

4 in. x 2

100 mm x 2

Filter Emission Rating

0.05 mg/m³

0.05 mg/m³

Filter Surface Area

75 SF

7 m²

Noise Rating @3m

61-72 dB(A)

61-72 dB(A)

Max.Dust Bin Capacity

32 GAL

120 L

Manual Filter Cleaning

Yes

Yes

Intelligent Dust-Full Monitoring system

Yes

Yes

Pressure Gauge

Yes

Yes

Support

  • Find a derler
  • Our team
  • Contact us

Catalog

  • ALPHA
  • Ambassador
  • Bridge city
  • Gyro air